2D board view and 3D preview
See what the board will look like while you draw it: component heights, connector orientation, whether it fits the enclosure — without waiting for a physical prototype.
What it actually does
- Schematic, 2D board and 3D preview stay in sync
- Heights and orientation in 3D catch assembly clashes early
- Top and bottom viewed separately, silkscreen and mask in their real colours
- Rotate, zoom, section through it, or grab a screenshot to send a colleague
How it works
- 1
1. Describe the board you need
One sentence covering the MCU, how it is powered, and what it drives. A hand sketch or a photo of a reference board works too.
- 2
2. AI handles parts and layout
Part selection, schematic, nets, placement and routing in one pass, with DRC/ERC run over it — you get a real, editable board, not a design write-up.
- 3
3. Export and get it made
Export Gerber, Drill, BOM, and CPL and send them straight to a fab house for a quote. Every version is archived, so you can always go back.
FAQ
Outlines and heights are rendered from the footprint's nominal dimensions, which is enough to judge whether something fits. For precise mechanical fit, export STEP and check it in mechanical software.
A block is generated from the footprint dimensions — the height and outline are right, the appearance is indicative. You can upload your own model for the parts that matter.
Yes. Export the outline and the 3D model so the mechanical side can work on the enclosure fit without measuring off a drawing.
More things it can do
Lay out a whole board from one sentence → Every part can be changed by AI → Or just change it yourself → Start from a finished board → Errors caught as you draw → The parts list comes with it → Free address, share instantly → Shared pages come with SEO → See who came by → Manufacturing files in one click →