Every part can be changed by AI
Once it is laid out, click what you want changed: swap a footprint, change a value, add a power rail, rearrange the placement — 18 one-click actions across four areas, each undoable in one step.
What it actually does
- Components, footprints, values, nets, placement, silkscreen — just say it in the AI assistant
- Changes go straight into the board source, and every save keeps a version
- Swap a part and the related traces and pull-ups follow — no manual patching
- Undo in one step in the editor; every save keeps a version you can go back to
How it works
- 1
1. Describe the board you need
One sentence covering the MCU, how it is powered, and what it drives. A hand sketch or a photo of a reference board works too.
- 2
2. AI handles parts and layout
Part selection, schematic, nets, placement and routing in one pass, evaluated on the spot so routing conflicts surface right away — you get a real, editable board, not a design write-up.
- 3
3. Export and get it made
Export Gerber, Drill, BOM, and CPL and send them straight to a fab house for a quote. Every version is archived, so you can always go back.
FAQ
Yes. AI’s changes land in the board source and keep a revision, so one step undoes them in the editor — and the Code page lets you open any earlier version.
It changes what you ask it to change. You see the result in the editor right away, one step undoes it, and every save keeps a version.
The board outline and mounting holes are not changed on a whim — those are dimensions that have to match an enclosure, and getting them wrong means the board doesn't fit. Ask with explicit dimensions and it will change them.